• itsnicodegallo@lemm.ee
    link
    fedilink
    arrow-up
    121
    arrow-down
    3
    ·
    6 months ago

    Buddy…

    1. Turn your shirt inside out before putting it in the machine.
    2. Set the machine to cold water, delicate/gentle cycle.
    3. The picture you posted is of a dry, hot desert, right? What do you think a machine called a dryer that uses heat will do? Hang them to dry on a cheap rack from Amazon or your shower curtain rod instead.

    I have shirts that still look practically new after dozens and dozens of washes.

        • ulterno@lemmy.kde.social
          link
          fedilink
          English
          arrow-up
          2
          ·
          6 months ago

          If you are on the correct website, you may have a view source button, so you can see the markdown source everyone writes to form their post.

          • Redjard@lemmy.dbzer0.com
            link
            fedilink
            arrow-up
            5
            ·
            edit-2
            6 months ago

            In markdown, there is the notation []() for links. Reddit allowed it too for examples, and generally a lot of programs and platforms that have mild text formatting use markdown.
            [some text](https://example.org/some-link) will turn into some text

            Lemmy has basically extended this with ![]() which shows the content of the link
            ![some text](https://lemmy.kya.moe/imgproxy?src=upload.wikimedia.org%2fwikipedia/commons/7/70/Example.png) will turn into some text

            Where did that “some text” go? It’s basically the placeholder for when the image is loading or failed to load, the correct term is the alt-text.

            The image @Branch_Ranch@lemmy.world was asking about uses the text
            ![](https://ttrpg.network/pictrs/image/396cb01b-6b2b-4351-9cd5-0742c2914719.png)
            It has no alt text. Any frontent that has an image upload button or similar will upload the image somewhere, take the link, and put it into your post like this.

            I hope your frontend renders code-blocks and escapes with backslash (\) correctly, else this may look weird to you.

        • Cataphract@lemmy.ml
          link
          fedilink
          arrow-up
          2
          arrow-down
          1
          ·
          edit-2
          6 months ago

          For me it’s the 5th button above the typing field for a reply/comment (bold/italic/link/emoji/“upload image”). There is also the syntax format you can manually do which you can find in the formatting help link. an ! with [] then (url) no spaces (hard to show without the format wanting to change it).

          edit: I believe the proper use of “upload image” is if you want to share an image from your device which it uploads onto the lemmy server space, using the url to link to another website also works but there is always the problem of size/format of the image and if that link becomes broken your image won’t show.

          • Cliff@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            6 months ago

            hard to show without the format wanting to change it

            Could use a code block for this:

            ![](URL_of_the_picture)
            
      • itsnicodegallo@lemm.ee
        link
        fedilink
        arrow-up
        18
        ·
        6 months ago
        1. OP can turn them inside out themselves when they take the shirts off and put them in the dirt clothes hamper.
        2. You don’t change the settings for every individual article of clothing. You turn the knob or press the button once. This is not hard.
        3. Hanging stuff up is easier and faster than folding it. The actual drying part is slow though.
        • Smoogs@lemmy.world
          link
          fedilink
          arrow-up
          2
          arrow-down
          4
          ·
          6 months ago

          I don’t know what’s more sexist. the comment above or the fact you played off of it seriously. Especially with point 1. Like it doesn’t even register that the above comment was an insult and not serious at all and you took that sexist joke to a serious place to play off that men aren’t expected to even be capable to turn a knob and that is somehow acceptable. Do them better than this.

          • AA5B@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            edit-2
            6 months ago

            Works both ways though. That was a big point of contention while I was married: if you want special treatment for any item of clothes, it’s up to you to at least turn it inside out and sort it into the “special needs” bin. I’m not reading every label on all the clothes for the entire family.

            However she never did. Just complained when it went through the normal wash with hundreds of other items. Who’s your momma now? Your big hairy momma with a beard?

          • Doof@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            6 months ago

            I’m pretty sure they were mocking their lack of responsibility vs saying only women do laundry. It’s the same joke as saying you live in your parents basement.

          • brbposting@sh.itjust.works
            link
            fedilink
            arrow-up
            1
            ·
            6 months ago

            Are women excluded from the group of people whose “mommies do everything for them”? Perhaps commonly, it’s a genuine question.

            I do see the thought of it being a mom instead of a dad adheres to traditional gender roles, although I wonder about an individual’s obligation to resist playing into that tradition. I can see it being harmful.

    • Rob Bos@lemmy.ca
      link
      fedilink
      arrow-up
      2
      ·
      6 months ago

      Even just hang drying will do wonders. Also for your budget. That’s like 5 dollars a week saved.

  • Moghul@lemmy.world
    link
    fedilink
    arrow-up
    68
    arrow-down
    1
    ·
    edit-2
    6 months ago

    I wash all my band shirts in a washing machine at 40C with only color detergent and no fabric softener. I hang dry the tshirts on hangers instead of folding them over the clothes line or using clothes pins. Absolutely no dryer outside of whatever the washing machine does.

    It works pretty well. The real secret is to have about 30 of them so you don’t wash them every week.

    Edit: like another commenter said, wash your clothes inside out.

  • TehBamski@lemmy.world
    link
    fedilink
    arrow-up
    38
    arrow-down
    1
    ·
    6 months ago

    IIRC: To prevent this from happening or slowing down the occurrence, turn your shirt inside out before you put it in the washing machine and dryer. Set both to the lowest or second lowest temperature for both machines. Works well for me. But as others have said, air drying is the best way to treat them. Me on the other hand…

  • dingus@lemmy.world
    link
    fedilink
    English
    arrow-up
    28
    ·
    6 months ago

    I’ve had a couple of t shirts through the years where the fabric itself seems to have been dyed into an image instead of just being screen printed on. I get it obviously must be more expensive, but it holds up amazingly and I wish more places out there did this.

    • dogsoahC@lemm.ee
      link
      fedilink
      arrow-up
      11
      ·
      6 months ago

      I once bought some cheap-ass knockoff merch shirt that was printed like that. And shit cost, like, five bucks.

      (In retrospect, I’m not proud of buying products of likely slave labor, but what’s done is done.)

      • BakerBagel@midwest.social
        link
        fedilink
        arrow-up
        11
        ·
        6 months ago

        There is slave labor at aome point in pretty much every product you use. The cotton used for your shirt, the cocoa in your chocolate bar, the strawberry you had in your salad today, all likely had forced labor to some degree. Even the cartoon you watched last night might have been animated bu some korean child.

  • gigachad@feddit.de
    link
    fedilink
    arrow-up
    26
    ·
    edit-2
    6 months ago

    For clothes I have 2 rules: 1) If the zipper is not made by YKK, fuck it I don’t need that article 2) I never buy cheap screen printed fabric t shirts. DTG on cotton all the way.

  • guyrocket@kbin.social
    link
    fedilink
    arrow-up
    19
    arrow-down
    4
    ·
    6 months ago

    And that “tagless label” is gone after the first wash too.

    Doing their best to kill the used clothing market.

      • Krauerking@lemy.lol
        link
        fedilink
        arrow-up
        7
        ·
        6 months ago

        Oh yeah, good shirts are practically the same as vampires or weird rich people.
        They need a constant supply of blood to keep up it’s appearance.

    • brbposting@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      6 months ago

      Tagless labels disappearing isn’t ideal. It’s a bummer that clothing has been produced so cheaply over the last some years that now much of it, which is donated overseas, ends up not being worth repairing and/or reselling.

  • Downcount@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    6 months ago

    If they look like this after a week, they are not your best t-shirts.

    Also: you can actually feel, if the paint is going to look like this after some time.

      • snooggums@midwest.social
        link
        fedilink
        English
        arrow-up
        4
        ·
        6 months ago

        I swear live nation and Ticketmaster are in cahoots to keep shitty vinyl press shops in business

        Shitty quality means they wear out and need replacing faster.

      • Furbag@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        6 months ago

        I wish more places just dyed the fabric. I have some shirts that are 10+ years old and look exactly like the day I bought them and they all are graphic tees with the image dyed into the shirt itself. The ones I have with a plastic-y decoration on the front, even if I take all the special precautions that other posters mention in the thread, will inevitably crack and wear out over time.

        My problem is I want to get a custom design printed, and a lot of places will advertise that they screen print, but if you go to their website and create a custom design you find that they either won’t do less than X number of shirts as a minimum order, or they will just vinyl print it anyway and send you that for $35 and it will fall apart almost instantly.

        • Paradachshund@lemmy.today
          link
          fedilink
          arrow-up
          2
          ·
          6 months ago

          Most of the time print minimums exist because there’s a cost for the printer to run the job at all, regardless of size, and that minimum is the lowest amount of products that doesn’t sound insane per item. I used to work for a printshop and we had no minimums, but if you only wanted 1 business card, that business card was going to cost like $50+. You could buy 150 for cents more than that because all you were paying for was the setup and the job happening at all. The paper and ink cost wasn’t even a factor at that size.

    • dustyData@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      6 months ago

      Some of the worst shirts I’ve seen, both fabric quality wise and print wise, have been at concerts for my favorite bands. Some of the best as well. If you want something guaranteed to last a long time you have to pay for expensive custom made designs. But then again, this defeats the purpose of directly supporting your favorites with the extra merchandize.

  • MaxHardwood@lemmy.ca
    link
    fedilink
    English
    arrow-up
    8
    ·
    6 months ago

    You should check out Dan Flashes if you want some really amazing and complicated patterns.

      • Kiosade@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        6 months ago

        The fact that anyone is using anything higher than low for their clothes is shocking. If your clothes aren’t drying, it means you need to split the load into 2 separate ones, people!

        • LordKitsuna@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          6 months ago

          People are wildly impatient about the dumbest things. I’ve been trying to push heat pump dryers because they use like a fourth of the electricity of a standard electric dryer but people don’t want to because it takes slightly longer to dry heavy things like towels. But they have the added benefit of using very little heat because they’re abusing the fact that they are condensers and are making the air very very dry so they don’t need as much heat so they are far gentler on clothing

          But they just hard refuse Despite the fact i know for an absolute fact all these people wait fucking hours after dryer is done to collect it or move it around. So it’s a worthless argument

    • Lemonparty@lemm.ee
      link
      fedilink
      arrow-up
      1
      ·
      6 months ago
      1. wash in cold water only
      2. wash inside out
      3. air dry

      No cracks, no fading. You’re welcome

    • grrgyle@slrpnk.net
      link
      fedilink
      arrow-up
      8
      ·
      6 months ago

      Honestly just wear it wet

      No but seriously hang drying will help. Also not buying screen printed tees

  • MonkderDritte@feddit.de
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    6 months ago

    Look up which brand were the ones that hold out and look there for cool shirts. Likely not the 5 bucks slave labor ones.