I’m looking to buy ups as I have few power outage (last between 1 to 5 seconds max) where I live but I have never used one so don’t know what specs should I check for

Ideally I will plug my 3d printer (about 100-160w when printing), a pi 4 with nvme drive (no idea of wattage) and a mini pc with n100 processor (around 10-20W)

Thanks for your advices

  • EmilieEvans@lemmy.mlEnglish
    2·
    2 months ago

    The biggest issue is battery size: If the heatbed cools down the print fails. The heating is the part that takes the most power so the battery has to be large enough to support the entire remaining print duration or power outage.

    • paf@jlai.luOPEnglish
      1·
      2 months ago

      Shouldn’t be an issue, power outage here are mostly about one second (5 at max) and even if my printer is being halted, my glass bed stick so much that my print don’t pop off by themselves, I always use a scraper even when completely cool down.