kevin left the ladder there. he forgot his security access pass at home, therefore he needed a ladder carried on his shoulder when passing security check. this always works: guy with ladder, enters any building - no problem

try BAR - beyond all reason

long press power button

cat is build better. cat can stand good.

egg-sackly what op would want

then you have to go with one piece again

in australia even the internet is trying to kill you

square feet must look funny

pedestrians should honk

i like those triple supplies from rigol. its much like the siglent you posted, but the 3rd channel is not fixed. its also fairly easy to script it with python. dp800 series.

yep, here! and its awesome!!!

404 😕

yes i think so, but u would have to make sure the solder will rise through the through-hole as mich as possible. maybe u can try to find the faulty pin with wiggling them separately

pressfit connections usually are very reliable. if there is a poor connection i would presume that the barrel of the via is broken and a new pressfit connector will not help. maybe putting solder in would help. did you already test for poor connections?

ah well, then it doesn’t work proper with 5v unfortunately

usually fans have a min start voltage. u can try if your fan starts at 5v and if the resulting RPM is ok for you, just solder it without any resistor on USB

i would probably do some circuit with a TL431 and FETs, but this also drains some small amount of battery current.