It seems that most of the drywall mounts that I looked for printed in a vertical orientation, which is not good for strength.

For once, I didn’t reverse engineer anything to design this. Lulz.

https://www.printables.com/model/548516-printable-drywall-mount


Update 8/10 - Added dimension sketches, Added .step file, Added a thinner support ring option that will sit more flush (but not completely)

  • Imgonnatrythis@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    2
    ·
    1 year ago

    Neat, now I can yell at you when shit falls down instead of just cursing these mounts in general. I hate these things, they often don’t install well, fall apart and never hold the weight they are rated for. I’ve tried a bunch of different types and they all kinda suck. Print me a better studfinder and we can be friends.

    I'll bookmark it because I'd rather print one than buy it, but just seeing these raises my BP. 
    
    • remotelove@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      You can yell at me all you want! If you need a hug, I can get you one of those as well, no charge.

      I am using some of the mounts now for some pictures, but I can say they are extremely stout, at least the way I printed them. You have to use a hammer to tap them in the last little bit so it doesn’t spin. They survived some fairly hard love taps, and once the screw was in, they aren’t moving.

      Your personal experience may be different.

      • Imgonnatrythis@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I don’t say no to hugs.

        That retainer ring looks pretty stout. Do you somehow counter-sink that to get it flush or just let that hang out?

        • remotelove@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          They sit 3mm proud. This is not an issue if they are hidden, me thinks. However, you should be able to not use the support ring if it is an issue. (I’ll modify a design today in attempt to reduce the amount it sticks out.)

          Also, these are intended to be extremely secure and almost permanent. If you want it flush, you can probably pound it in a little more with a hammer. If not, leave it proud and it gives you a little meat to pull it out of the wall later.

    • rambos@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      There are some other types for higher loads, but its not about anchor, its more about shitty drywall cant hold any load. If you want to hang something heavy you need wooden/metal plate in drywall or you need a concrete wall 😜