Fess up. You know it was you.
Did you know that “Terminate” is not an appropriate way to stop an AWS EC2 instance? I sure as hell didn’t.
Explain more?
“Stop” is the AWS EC2 verb for shutting down a box, but leaving the configuration and storage alone. You do it for load balancing, or when you’re done testing or developing something for the day but you’ll need to go back to it tomorrow. To undo a Stop, you just do a Start, and it’s just like power cycling a computer.
“Terminate” is the AWS EC2 verb for shutting down a box, deleting the configuration and (usually) deleting the storage as well. It’s the “nuke it from orbit” option. You do it for temporary instances or instances with sensitive information that needs to go away. To undo a Terminate, you weep profusely and then manually rebuild everything; or, if you’re very, very lucky, you restore from backups (or an AMI).
Apparently Terminate means stop and destroy. Definitely something to use with care.
Maybe there should be some warning message… Maybe a question requiring you to manually type “yes I want it” or something.
Maybe an entire feature that disables it so you can’t do it accidentally, call it “termination protection” or something
Noob was told to change some parameters on an AWS EC2 instance, requiring a stop/start. Selected terminate instead, killing the instance.
Crappy company, running production infrastructure in AWS without giving proper training and securing a suitable backup process.
It was the bad old days of sysadmin, where literally every critical service ran on an iron box in the basement.
I was on my first oncall rotation. Got my first call from helpdesk, exchange was down, it’s 3AM, and the oncall backup and Exchange SMEs weren’t responding to pages.
Now I knew Exchange well enough, but I was new to this role and this architecture. I knew the system was clustered, so I quickly pulled the documentation and logged into the cluster manager.
I reviewed the docs several times, we had Exchange server 1 named something thoughtful like exh-001 and server 2 named exh-002 or something.
Well, I’d reviewed the docs and helpdesk and stakeholders were desperate to move forward, so I initiated a failover from clustered mode with 001 as the primary, instead to unclustered mode pointing directly to server 10.x.x.xx2
What’s that you ask? Why did I suddenly switch to the IP address rather than the DNS name? Well that’s how the servers were registered in the cluster manager. Nothing to worry about.
Well… Anyone want to guess which DNS name 10.x.x.xx2 was registered to?
Yeah. Not exh-002. For some crazy legacy reason the DNS names had been remapped in the distant past.
So anyway that’s how I made a 15 minute outage into a 5 hour one.
On the plus side, I learned a lot and didn’t get fired.
I didn’t call out a specific dimension on a machined part; instead I left it to the machinist to understand and figure out what needed to be done without explicitly making it clear.
That part was a 2 ton forging with two layers of explosion-bonded cladding on one side. The machinist faced all the way through a cladding layer before realizing something was off.
The replacement had a 6 month lead time.
That’s hilarious, actually pretty recently I “caused” a line stop because a marker feature (for visuals at assembly, so pretty meaningless dimension overall) was very much over dimensioned (we talking depth, rad, width, location from step) and to top it off instead of a spot drill just doing a .01 plunge they interpolated it! (Why I have zero clue). So it was leaving dwell marks for at least the past 10 months and because it was over dimensioned it all of them had to be put on hold because DOD demands perfection (aircraft engine parts)
One time I was deleting a user from our MySQL-backed RADIUS database.
DELETE * FROM PASSWORDS;
And yeah, if you don’t have a WHERE clause? It just deletes everything. About 60,000 records for a decent-sized ISP.
That afternoon really, really sucked. We had only ad-hoc backups. It was not a well-run business.
Now when I interview sysadmins (or these days devops), I always ask about their worst cock-up. It tells you a lot about a candidate.
BEGIN TRAN
ROLLBACK TRAN
This. My comment was going to be “what kind of maniac uses auto commit?”
I always put the where clause first since a fuck up in my early 20s lost a loans company £40k of business.
My trick is writing it as a
SELECTstatement first, making sure it’s returning the right number of records, and then switching out theSELECTforDELETE. Hasn’t steered me wrong yet.This.
I was a sysadmin in the US Air Force for 20 years. One of my assignments was working at the headquarters for AFCENT (Air Forces Central Command), which oversees every deployed base in the middle east. Specifically, I worked on a tier 3 help desk, solving problems that the help desks at deployed bases couldn’t figure out.
Normally, we got our issues in tickets forwarded to us from the individual base’s Communications Squadron (IT squadron at a base). But one day, we got a call from the commander of a base’s Comm Sq. Apparently, every user account on the base has disappeared and he needed our help restoring accounts!
The first thing we did was dig through server logs to determine what caused it. No sense fixing it if an automated process was the cause and would just undo our work, right?
We found one Technical Sergeant logged in who had run a command to delete every single user account in the directory tree. We sought him out and he claimed he was trying to remove one individual, but accidentally selected the tree instead of the individual. It just so happened to be the base’s tree, not an individual office or squadron.
As his rank implies, he’s supposed to be the technical expert in his field. But this guy was an idiot who shouldn’t have been touching user accounts in the first place. Managing user accounts in an Airman job; a simple job given to our lowest-ranking members as they’re learning how to be sysadmins. And he couldn’t even do that.
It was a very large base. It took 3 days to recover all accounts from backup. The Technical Sergeant had his admin privileges revoked and spent the rest of his deployment sitting in a corner, doing administrative paperwork.
Always skeptical of people that don’t own up to mistakes. Would much rather they own it and speak to what they learned.
It’s difficult because you have a 50/50 of having a manager that doesn’t respect mistakes and will immediately get you fired for it (to the best of their abilities), versus one that considers such a mistake to be very expensive training.
I simply can’t blame people for self-defense. I interned at a ‘non-profit’ where there had apparently been a revolving door of employees being fired for making entirely reasonable mistakes and looking back at it a dozen years later, it’s no surprise that nobody was getting anything done in that environment.
Incredibly short-sighted, especially for a nonprofit. You just spent some huge amount of time and money training a person to never make that mistake again, why would you throw that investment away?
Forgive me, but that’s a figure of speech I’ve never heard before. What does it mean?
By breaking production, I’m referring to a situation where someone, most likely in a technical job, broke a system that was intended to be responsible for the operation for some kind of service. Most of the responses here, which have been great to read, are about messing up things like software, databases, servers and other hardware.
Stuff happens and we all make mistakes. It’s what you take away from the experience that matters.
I don’t work with a lot of systems, but one thing instantly comes to mind.
Advertised an OS deployment to the ‘All Wokstations’ collection by mistake. I only realized after 30 minutes when peoples workstations started rebooting. Worked right through the night recovering and restoring about 200 machines.
I acidentally destroyed the production system completely thru improper partition resize. We got the database snapshot, but it’s in that server as well. After scrambling around for half a day, I managed to recover some of the older data dumps.
So I spun up the new server from scratch, restored the database with some slightly outdated dump, installed the code (which was thankfully managed thru git), and configured everything to run all in an hour or two.
The best part: everybody else knows this as some trivial misconfiguration. This happened in 2021.
Was wondering if anybody here had made the news.
Two things pop up
- I once left an
alert()asking “what the fuck?”. That was mostly laughed upon, so no worry. - I accidentally dropped the production database and replaced it by the staging one. That was not laughed upon.
I once dropped a table in the production database. I did not replace it with the same table from staging.
On the bright side, we discovered our vendor wasn’t doing daily backups.
- I once left an
I took down an ISPfor a couple hours because I forgot the ‘add’ keyword at the end of a Cisco configuration line
That’s a rite of passage for anyone working on Cisco’s shit TUI. At least its gotten better with some of the newer stuff. IOS-XR supported commits and diffing.
Early in my career as a cloud sysadmin, shut down the production database server of a public website for a couple of minutes accidentally. Not that bad and most users probably just got a little annoyed, but it didn’t go unnoticed by management 😬 had to come up with a BS excuse that it was a false alarm.
Because of the legacy OS image of the server, simply changing the disk size in the cloud management portal wasn’t enough and it was necessary to make changes to the partition table via command line. I did my research, planned the procedure and fallback process, then spun up a new VM to test it out before trying it on prod. Everything went smoothly except on the moment I had to shut down and delete the newly created VM, I instead shut down the original prod VM because they had similar names.
Put everything back in place, and eventually resized the original prod VM, but not without almost suffering a heart attack. At least I didn’t go as far as deleting the actual database server :D
I tried to change ONE record in the production db but I forgot the WHILE clause, ended up changing over 2 MILLION records instead. Three hour production shutdown. Fun times.
I spent over 20 years in the military in IT. I took took down the network at every base I was ever at each time finding a new way to do it. Sometimes, but rarely, intentionally.
took out a node center by applying the patches gd recommended… took an entire weekend to restore all the shots and my ass got fed 3/4ths into the woodchipper before it came out that the vendor was at fault for this debacle.
Set off cascading event bus loops that ran out of control. Friends don’t let friends allow events to spawn more events.
I once “biased for action” and removed some “unused” NS records to “fix” a flakey DNS resolution issue without telling anyone on a Friday afternoon before going out to dinner with family.
Turns out my fix did not work and those DNS records were actually important. Checked on the website halfway into the meal and freaked the fuck out once I realized the site went from resolving 90% of the time to not resolving at all. The worst part was when I finally got the guts to report I messed up on the group channel, DNS was somehow still resolving for both our internal monitoring and for everyone else who tried manually. My issue got shoo-shoo’d away, and I was left there not even sure of what to do next.
I spent the rest of my time on my phone, refreshing the website and resolving domain names in an online Dig tool over and over again, anxiety growing, knowing I couldn’t do anything to fix my “fix” while I was outside.
Once I came home I ended up reversing everything I did which seemed to bring it back to the original flakey state. Learned the value of SOPs and taking things slow after that (and also to not screw with DNS).
If this story has a happy ending, it’s that we did eventually fix the flakey DNS issue later, going through a more rigorous review this time. On the other hand, how and why I, a junior at the time, became the de facto owner of an entire product’s DNS infra remains a big mystery to me.
Hopefully you learned a rule I try to live by despite not listing it: “no significant changes on Friday, no changes at all on Friday afternoon”.
Plugged a serial cable into a UPS that was not expecting RS232. Took down the entire server room. Beyoop.
You don’t have two unrelated power inputs? (UPS and regular power)
This was 2001 at a shoestring dialup ISP that also did consulting and had a couple small software products. So no.
Crashed a important server because it didnt have room for the update I was trying to install. Love old windows servers.
