Duped? Complicit

Much want

I took one look at the open evse instructions and noped the f out. I’m not an electrician nor trustworthy to do that level of work. I wouldn’t trust most home gamers to wire Ethernet let alone 240/60amps.

2001 Subaru Impreza 2.5 rs silver - glider 2008 Subaru WRX STI white - bar of soap or the sti 2006 Honda element silver - bento (Japanese for box) 2024 vw id.4 Black - ghost, because it was gone for a month at the dealership after we purchased it.

Which do you like driving more? And which do you think is a better / more reliable car?

I was locked in on the id.4 for the price, I ended up getting the car for about 31.5 OTD, for an AWD pro, after 7500/3500/1000 in incentives, so the mach e or other EV’s were not really in the conversation. We had looked at the Kona, but it’s too small for our use too.

The 24 has some updates that prior years don’t have. So far I don’t mind them. I’m really still adjusting to the car and trying to get it set to my liking. Lots of little things which are odd. So much light in the cabin at night.

The UI is still really distracting while driving in general. In my old car, I could defrost, or dial the radio with out looking, I could adjust heat direction or put on defogger without thought. This is far more attention requiring.

But, I like the car. Far from perfect, but light years more advanced than the 15 year old sti it replaced. Faster too.

No I mean vw gives electrify America 500 kWh charging for the 24’s, unlike prior years with free 30 m sessions for 3 years

I was a little surprised at how expensive it was, and I’ve only got 500kwh of charging… But that’s why I got l2 at home.

That last comment I feel, even if I’ve only gone a short distance.

Ill take un neutered over neutered One time over subscription

This subscription model of life just sucks.

I’m impressed. I’ve got a inkjet that Is about 18 years old. I have to occasionally wipe off the print head, but otherwise has never needed repairs. The ender 3 we have has needed replacement parts from heads to hot ends and feeders, and every print requires specific to it setting. I can print to my hp using generic drivers without a second thought. 3d printers are far from that level of ease of use/ reliability. I’m glad your stuff worked, but that’s the minority.

and a propper xlsx too

Updated post with a csv and the ics updated too.

I’ve averaged just under 40 miles per week this year. I run typically 5/6x a week. I fit running in around life, so early before work, some times at night. If I’m dropping kids off to something I may park and run, instead of just going home. I have friend whom I regularly run with which helps with the winter dolldrums. Having races helps. I do take limited down weeks, only one single digit week all year. I manage to stay healthy by not over extending. I am leaving some gains out there, but I would rather be out there than on the sidelines.

Specifically for the winter/summer timing is key. I go when it’s warmest in winter (I work at home), and coolest in the summer (early), I have a dreadmill, and a good heat/cold tolerance. Oh, and good gear. Gloves and tights and hand warmers are your friend.

I don’t have real answers, this is my biggest milage running year ever by far, but also my best in terms of performance. Prs in 10k, and half by big margins.

Good luck, and keep at it.

Not shocked at all. Running marathons fast, takes a fair amount of investment in running. While more miles is not the only answer to getting faster, one has to get a certain amount of miles in per week to be able to maintain fitness and be able to do workouts which will allow you to run the marathon fast.

Once you get to a certain amount of miles per week, and fitness, it is then about making sure you are getting quality miles in, but that line is like 40-55 miles per week. Lower than that, and you have to have raw talent and other cardio fitness to maintain the effort.

At least that’s my experience, and I just barely bq’d at 55mpw the past two years, but I’m older with and ‘easier’ sub 3:20 bq time, sub 3:10 would be likely 63-70 mpw territory for me if I were under 45. (I’m aiming for 3:10 this spring)

When I’m training I do 3 up one down. Building three weeks, then the fourth week I drop back one week in duration. This is usually good for mid plan recovery, for just general recovery, I’d say do 75% of your normal work load. 2 shorter runs and a walk, 2 lighter lifts and a plyo session, in general recovery is doing less, not nothing at least for me.

Good luck.

Depends on the shoe, but I rarely get more than 3-500 miles. Just tossed a pair with only 3:16 on them, but they were worn down on the heel, and had started to make me excessive fatigue after even short runs. I got 500 from a pair of Hoka bondi 7’s. I’m pretty hard on shoes, I have an aggressive wear pattern due to a shorter leg. I try to compensate by buying shoes on sale and rotating them as much as possible. But your milage may totally vary. But replace em when you think you need to, many ultra runners get 1k +

Totally not judging. I was a new runner once too. Running is very specific activity, were the majority of improvements come simply from just running more. However, running more is a very slow process, you can’t go from 0 miles, to 10 miles, and expect them to be fast. While you are fit, you aren’t running fit, it’s like being fit and not being lift heavy fit. Your plan is a get to the finish plan, which is good for ramping and getting to the finish line, but isn’t really going to build speed, but that will come if you continue to work at it. Don’t get discouraged, the improvement when you start are often the the biggest jumps you have. Good luck

Some of this is intentional by design. Shedding head count through willing attrition.

Yes, people can work on it, if they want to put effort in on that. Some times all they have energy for is the interval they are in. Some people can resist temptation, some people are addicted. We aren’t all given the same ability.