I’m both. Somehow. I apparently switch between them.

Isn’t the Banana Pi R64/R3/R4 close enough to that?

FYI the open source OpenWRT based Banana Pi R3 AX 4x4 is a thing. Don’t buy closed source Routers/APs on purpose.

Sound like another reason for the “free press” to get reforms about their accuracy reporting the “news”. I am typically against such restrictive legislation but if the news holds that much power, they need to see some regulation put in place.

Every time someone writes x.com I immediately think they’re talking about a porn site. What a shit rebrand. Or what a perfect name I guess?

I suppose one interpretation is that companies can no longer use “buy” and will have to use “rent” for that transaction.

My solution is RAIDZ5 and storing the backup on LTO6 tape with parity/erasure code. I think the fact that scrub times take 24 hours even on 16TB drives is already over the safety margin. If a drive failure happens, the first thing I’ll do to run a manual diff backup which should take a fraction of the time and then run the ZFS resilver.

I’m beginning to see why SSD RAID is being considered now. My guess for HDDs in enterprise is that a RAID 15 (I made this up) would be considered. What I mean is data is stored on two identical servers each running RAID5 or 6. Off the shelf solutions like Gluster exist and that seems to be gaining traction at least according to Linus Tech Tips.

I think the only way it makes sense for Framework to get into the phone market is to follow the footsteps of Pine64 trying to create Linux phones. There’s no point making a phone at an inherently higher cost to make it more durable and repairable with a “closed SDK” SoC that has a fixed EoL date. I made a more detailed comment about this in the main thread.

I as far as I know the best OpenWRT AP’s / Routers you can buy right now is the Banana Pi R64, R3, R4(Still in development). Open source firmware with a long support life of updates and security patches and a nice metal casing.

I say as far as I know because I have not bought one yet as I don’t have the funds for that right now. It is my next AP replacement though.

Framework tackling phones is useless if they go the mainstream SoC route (Qualcomm, Mediatek) as they don’t have the software team needed to make those work properly (I would argue alot of handset manufactures don’t either). From what I hear you need a hell of software team to “fix” the garbage Android SDK released for those chips. Most importantly is if they go the closed mainstream SoC route which have EoL SDK support dates then what’s the point of building a durable repairable phone at a higher price point when you have to throw it out at the same as everyone else?

I want to see Framework enter the Linux phone market using “open” chips like Rockchip alongside Pine64’s Pinephone (Pro) and the Librem 5 as I think they would more likely have the funds, dev time and community support to help bring say PostmarketOS into a usable state then have to rework the SDK. This way the phone’s EoL date would be determined be the local phone infrastructure shutdowns. A much longer amount of time.

You wait. The Aussie government (federal, state or local, who cares) will find a way to spin this to look bad, tax the crap out of it or even outright ban it. You don’t starve the liberal’s mates (the power companies in this case) and get away with it.

I’m dying. 🤣

If your computer is incapable of even running Ubuntu. Then I don’t think it’s worth using.

Cool. So you can no longer turn your phone off.

You know what’s funny. I was investigating the hardware datasheets for the PinePhone and looking at the RTC module and just like PC RTC chips there is an option to trigger an interrupt/power on when a certain time is met. That means that there appears to be no reason this couldn’t be a current feature on probably all modern smartphones. Just lack of software support.

You would surprised how much control a fearmongering narcissist can have over you. And I’d argue, most christian conservative are narcissists.

Yeah. All the cool kids are doing it. Like Tom Cruise.

Well I’m in my mid 20’s so I’m hoping for at least that long :). No I won’t likely need alot of what I store to last that long although I am a member of r/DataHoarder (not sure if they’re on lemmy yet) but for a few items like family photos/videos it’s nice to have it written in a way that I can mostly just set and forget. With the standardization and open source implementation of LTFS you have even less worry about having the software to read it in the future. A SAS IT mode HBA and linux with a git clone of the LTFS repo is all you need.

In terms of cost the drive was very expensive ($2500 NOS from eBay US) but if you treat that as the one off entry cost, the tapes are cheaper for me to buy than the equivalent in HDDs here in Australia. That’s comparing ~$460 20tb EXOS HDDs from serverpartdeals.com to $43 x 8 = $344 2.5TB LTO-6 from stutchdata.com.au.

Also I store the tapes in IP67 boxes from bunnings along with a pack of desiccant and put the boxes in a cool but damp area. Don’t really have alot of choice where I live. It’s either that or hot daily temperature swings. Basement vs attic/garage.

I hope that’s enough to store them correctly environmentally speaking. I am in the process of working out how to clean family VHS tapes that were not stored correctly and that’s not an operation I want to revisit. An extended project is to make 900mhz button cell humidity/temperature monitors to notify me when desiccant has expired.

This may seem excessive but I would argue most don’t do enough in an age where more and more is being stored digitally as the only copy rather than print, etc. I feel this is a small price to pay to keep the still more compact and convenient all digital lifestyle without the data loss issues most people experience. The drive was expensive to buy into but with how little I use it I hope it’s going to last a long time.

There is one on the Wikipedia page.

https://en.wikipedia.org/wiki/DVD-RAM

https://upload.wikimedia.org/wikipedia/commons/2/24/DVD-RAM_FUJIFILM_disc_removable_without_cartridge_locking_pin.jpg

Due to the caddy nature I believe there were plans or limited availability of double-sided disks. That would have made it so much more appealing I think.

Yea but the tape is likely to last the 20-30 year estimate. You couldn’t say the same about HDDs especially the helium sealed ones.

Whether the tape drive will survive as well is another question but between the simpler mechanism, a drive 2 generations ahead can still read the tape, parts inter-compatibility if you needed to frankenstein an older drive with new rollers and motors and just plain buying and keeping drives sealed in storage as new-old-stock ahead of time. You have a few options to choose from.

Where as with HDDs you may have to repair each one. The helium ones you may have to re-gas.

Tape sounds like a better long term archival/backup approach.