Tried it today, didn’t expect much, but I have to say I was pleasantly surprised at the speed and look and feel. I will give it a try for a while to see if I will switch from vscode permanently.
Tried it today, didn’t expect much, but I have to say I was pleasantly surprised at the speed and look and feel. I will give it a try for a while to see if I will switch from vscode permanently.
Not sure which country you’re from, but I’ve basically lost the any hope I can influence any policy in my country with ANY attitude. I hope I’m wrong about other countries.
Yes, not gonna happen. You know how many new devices get sold simply because old ones are no longer getting updates/software support? It’s planned obsolescence. No modern country would pass a law like that.
Any PC that has virtualization features can be used. Unless it’s very old, I’d say it’s supported. But it may not be enabled in the bios by default. It’s called VT-x for Intel and AMD-v for AMD, I think. But both are supported for at least 10 years on almost any PC.
It’s a hypervisor level virtual machine host and you can use it to install multiple os’s on the same machine with little overhead. I’ve been running haos like that for a few months now and I’m super satisfied.
Compatibility is iffy on some of the newer ones. Here’s a list of what works for some of them: https://github.com/Dunedan/mbp-2016-linux
Was gonna say it’s much more expensive than the rest, but on Thomann, B-stock is exactly the same price as Nux (B-stock also). And I’ve heard it’s good sounding and that one YT review on Anderton’s, says it sounds the most natural out of most of what I’ve listed. So now I’m undecided again. And for the headphone out - I don’t really care, I have a headphone amp. I have a sound interface and VST setup I can use for that.
It’s the cheapest from the list, and doesn’t appear to lack in versatility/features. The only thing I notice is it’s not a 24bit interface, but I don’t know if it bothers me. I already have a separate audio interface for when/if I record. And to be honest, while I plan on recording, I’ve recorded like one or two demos in the past 10 years.
Do you think there’s anything to be gained from going one size up? It’s stereo, perhaps near-field, it might sound better with some stereo effects? Currently, I’m thinking either Spark or Nux Mighty space. Spark is a lot cheaper, though.
I actually have a 2x12 cabinet sitting in a shed collecting dust, I haven’t used it in years. It’s just inconvenient for casual everyday practice. I’m a hobby player, with a small kid and a not too tolerant wife. What little practice/playing I get I need to be suuuper convenient, so I gather - desktop amp is a good choice. It’s a dad amp, basically.
I actually have used (and still do) a Vox amPlug headphone amp and it sounds amazing! But I can’t stand using it with headphones. I feel like I’m chained to my guitar. So I connect it to my HiFi system instead. And it works and sounds wonderful, I don’t need/want anything else. This is actually why I may want a desktop amp, it skips one step, which is having to connect to my HiFi system and provides additional versatility. But the headphone amp has its place too, I agree.
This might work. But I need it to have enough versatility on its own. It needs to have high gain (I’m a metal fan), plus some reverb/delay. I’d prefer not to need pedals for a practice amp. At least I think I need this, not sure unless you try. Also, second hand, I currently can’t find anything nice locally (I’m in Serbia).
Regarding price, you’re right, but I don’t have room for a 10’ combo and if I have to add a few pedals/fx, I think it would end up rarely being used. Though I agree these desktop amps are way overpriced. Like, I will likely skip Yamaha, just because I don’t feel like giving $450 for a practice amp.
I actually have a decent audio interface and I do have half-decent speakers, but they don’t fit on my desk, so they sit on a shelf and rarely get used. Anyway, this may be a silly use case and I’m not that bound to it. I just figured - the amp has full range speakers and it does sit on the desk and the amp has an audio interface. But this is more like - nice to have.
This is indeed a big plus I didn’t know it had! This means, even if the company died or stopped supporting the product, you still have options. Thanks.
Because you can’t end to end encrypt if you don’t have control over both ends. You’d need to trust the other end. Signal doesn’t and their user base especially doesn’t.
There is indeed multiple ways of doing anything in freecad. But over time, I prefer staying in Part design as much as possible as this makes it more modifiable and customizable and there are plenty of reasons more for me. But in the end - whatever works is good enough.
Shape binder is what you need. Shape binder can be used to reference geometry from another body. What I would do is I’d make one pocket on the main body. Then select another body and make it an active body. Then select the pocket you made (the surface or the edge) and create a shape binder (part design). This will effectively import the selected feature from the first body and you can reference it from second body. Make sure you hide the first body, as it somehow gets in the way of shape binder, for some reason. Repeat for third body.
Yes, flaxseed oil for salads is great. It just takes forever to polymerize. We’re talking weeks, maybe up to a month. But you can still use the cutlery, it will just wear off fast. You can speed it up by boiling it before use, but have to be careful to not burn it or have it go ablaze. I just use it raw and apply it from time to time, eventually it all just blends and I reapply once a year.
It’s actually quite common and is in theory superior to side grain ones. Dulls the knife less this way. All the cutting and gluing does make it more expensive though. I’ve never used one, so I’ll have to make one for myself and see if the hype is true.