Winter Cycling Tips:

Studded tires make riding a bicycle on ice much safer. The front one insures you won’t fall on your face, the rear one helps give you enough traction to move forward.

Full coverage fenders will keep your bike significantly cleaner, which means it corrode far less. And they keep snow/slush/water from flying up at you too.

Cold drains batteries much quicker. Consider getting a dynamo lighting setup so you don’t have to rely on batteries.

Your body generates a significant amount of heat while cycling, so it is best to dress so you will be somewhat cold the first mile or two, then you are more likely to be comfortable for the rest of the ride.

I’d rather imagine a world without monarchs, but with more opossums.

VI comes with a clock up in the corner of the screen so you actually have something tethering you to reality.

Already got plenty of people to talk to in my head, a Wilson wouldn’t be necessary. Could make one anyways if there is enough boredom.

A hut sounds more appealing than a cave, but the right cave could make me consider it.

Osees - A Foul Form

Run the Jewels - RTJ4

KGWL - PetroDragonic Apocalypse

Overhaul as in pull the bearings out, clean them with degreaser, then inspect them. If the bearings are not pitted and the retainer isn’t bent out of shape, you can reuse them. If they are messed up, they are very cheap to replace, many bike shops will have replacements on hand. Once you have cleaned or gotten new bearings, pack the cups they sit in full of grease, and reassemble. Typically bearing retainers will have a side that is more rounded and a side that is more flat, you usually want to put them into the cup rounded side facing in.

Once you have it back together, you want to adjust it. The goal is to have the bearings be as loose as possible while not having any play in them. You also want to make sure the locknut is tight against the cone.

This page has info that will be useful for the bottom bracket.

Pro-tip: These bikes usually come with little to no grease in the bottom bracket, headset, and front hub. I would recommend overhauling them sooner rather than later if you want the bearings to last.

P

BMX hubs tend to come with 3/8" axles rather than 10mm, which can potentially make it more difficult to find spare parts.

Cheap hubs, whether BMX or not, do sacrifice durability to get a low price. If you want your wheels to last, don’t go too cheap. With single speed hubs, if they use sealed cartridge bearings, then they are probably nice enough to last a long time. There are options for high quality loose ball bearing hubs too, but they will typically cost more than an entry level cartridge bearing hub.

Offer them a hug. 2074 sounds like a scary time to be alive.

Nah, many brands are capable of making a decent MTB. If you are grabbing something new, $1000 gets you an OK hardtail, $2000 gets you an OK full-suspension. Spending more gets you higher quality parts and lighter weight. Spending less, better to go used.

I’d add a tail.

Plasma Mobile with your distro of choice. Works better than Gnome or normal Plasma, especially when it comes to the on screen keyboard.

My head is now clipping through a cardboard box full of stuff. I assume that wouldn’t be very survivable.

Plasma mobile is worth a try, been pretty happy with it on a detachable 2 in 1 without it’s keyboard. The onscreen keyboard works better than Gnome or normal Plasma.

Double wall rims can be made to be lower weight than single wall rims, and reducing rotating weight makes more of a difference than reducing weight elsewhere on the bike. Depending on how much lighter the new rims are, the bike might accelerate quicker. If the difference isn’t really noticeable, higher quality tires paired with the new wheels should help get that upgraded feeling.

U

I picked pawb because furries know tech really well, so I can trust the server to be fairly reliable.

Looks like lemmy didn’t want to upload the meme. Guess its still a post though.

Bikes and weed.