Hmmm… that page doesn’t mention the free “personal use” license for hobbyists.
https://www.autodesk.com/products/fusion-360/personal
^ This page still exists, and doesn’t mention it is going away, so maybe there is still hope.
Hmmm… that page doesn’t mention the free “personal use” license for hobbyists.
https://www.autodesk.com/products/fusion-360/personal
^ This page still exists, and doesn’t mention it is going away, so maybe there is still hope.
To me this automation seems much better suited to using the Node-RED addon. There is a built in “delay” node that can be used for rate limiting. You would set the delay node to once per hour and put it between the node watching your motion sensor, and the node flipping the light switch. Easy stuff. You could do the same with one or two more nodes to get and check the current wind speed and put that inline as well.
Keep in mind though, any kind of rate limiting/cool down makes it more likely that the lights won’t turn on when you actually want them to. For example, if you leave the house and come back after the lights have turned off, but before the cool down period expires you won’t have lights.
tl;dr It was a bug. It is fixed in 17.1.
In general, if you think that the government should have a new or increased power (in this case deciding the “truth” of what people say online) you must consider how this power will be used when a government you do not agree with is eventually elected. They will still have that power, so how do you think they will use it?
No worries. I was really hoping you were fed up with an Ender 3 just like I am 🤣
Anything done by Michel Gondry, but this is a favorite: https://youtu.be/gLESpHrtvxs?si=zdeITwz-fe29LJlU
I just can’t imagine how much time was spent making that.
I’d very much like to see a follow up to this after you have a few prints under your belt. What you like or don’t like, or compare to other printers you’ve had.
Everyone should know that, very often, they are just wrong. And that’s ok. We all are.
The more ready you are to really accept that you could be wrong about anything, and admit when you are wrong about something, the better you will make your own life, as well as the lives of those around you.
You make a very good point here. Currently the provided backup node is limited to 10GB, which is a lot, but probably not for what you are trying to accomplish. The Anytype folks have also stated that in the future they plan to charge for larger backup nodes, which may be something you want to avoid.
In the meantime, because syncing is p2p, I believe you can effectively self-host by just making sure you have an internet-connected machine always running the client app. In that way, there will always be a peer to sync to, even if your backup node is full and not accepting more data.
Not self-hosting, but I have been using Anytype for a few months now and absolutely love it. I’m doing a lot of online coursework, and so I’m using Anytype to take and organize my notes actively for several hours a day, every day. I also use it for task tracking, journalling, and it has just generally become the place where I dump any kind of info I might need to retrieve in the future.
There is a learning curve before you get the hang of it. I was also frustrated by the editor at first, but now that I have learned some of the slash commands, added in with markdown formatting, I find it to be really efficient. One oddity that likely trips folks up is that every paragraph is a separate “block” which makes partially selecting text across blocks impossible. On the other hand though, it makes grabbing a block and repositioning or reformatting the contents super simple.
Keep in mind that Anytype is offline first, p2p for syncing, and end-to-end encrypted. So the value of self hosting is, I suppose, not using their provided (currently free) backup node? It doesn’t seem like a big deal to me unless you don’t trust the encryption.
Indeed. My Ecobees are actually prevented from accessing the internet at all at the network level, and they still work great through HA. The only issue is that without internet access, the clocks drift ¯_(ツ)_/¯
Ecobees work local-only if you use the HomeKit integration in HA (no Apple devices or cloud connection required).
Tubthumping
I started out as “oh that’s a neat idea, I should play around with it” and now, just a month or so later, I depend on it almost daily.
Just one example: My family was on vacation and my wife asked if I remembered how long our next planned activity would take. Of course I don’t remember, but because I was using Anytype as a scratch pad for picking out our vacation activities (this was weeks prior), I was able to pull up the answer on my phone in less than 10 seconds - even though I had no internet or cell service at the time.
Having not come from Notion, Obsidian, or any other related software, there was a bit of a learning curve for me. But now I can’t help but keep dumping information into it.
Cool! While Anytype also works offline, it looks like Obsidian’s canvas and available plugins make it pretty compelling. Thanks for sharing.
I’ve recently fallen pretty hard for Anytype (http://anytype.io). It’s a knowledge store/second brain application like Notion except it is decentralized, end to end encrypted, P2P, and open source. It has a little bit of a learning curve, but now that I’m comfortable with it, I can’t help but keep dumping information into it. Even though it is still “beta” it is really solid, and I feel really comfortable relying on it more and more.
Check out https://valetudo.cloud/pages/general/supported-robots.html
I can also recommend Roborock brand in general because the hardware seems decent and it runs well enough with no internet/smart app required. I’ve not installed Valetudo on mine because the S4 requires some hardware changes that I’m not comfortable making. Other Roborock models are much easier to install.
Good luck!
I suppose I could! I’d have to figure out what time server they are trying use and I guess screw with local dns to point at my local time server.
I’m not sure how to figure out what time server they are trying to use though. Do you have any insight on that? I’ve tried to use wireshark for stuff like this in the past, but I found it to be a little overwhelming for my level of network knowledge.
It all still works great for me across all my devices (Linux, Synology NAS, Mac, and iOS) plus it looks like their community forums are still active, and they have packages for Synology DSM 7, which is relatively new. The last iOS app update was 2022, but maybe that’s just a sign that it is stable and doesn’t need frequent updates?
I wonder if you were using their old software called BitTorrent Sync. At some point they did a rebranding, and it could have left you with an abandoned client that stopped working, maybe? ¯_(ツ)_/¯
Bummer that it’s not working for you. It’s definitely one of my favorite apps.
As you should expect, the truth is actually between the extremes of “facist trope that is completely false” and “all immigrants are evil.” A person in Ohio recently killed and ate a cat, but was not an immigrant.
For anyone who doesn’t want to click the link, it contains bodycam video of a police officer in Ohio recently arresting a US citizen with blood all over her, fur in her teeth, a dead cat nearby, and multiple eye witnesses saying she killed and ate the cat.
https://www.dailymail.co.uk/news/article-13844919/bodycam-eating-cat-Ohio-trup-pets.html