That is the male side of a bullet connector. You need to either get the corresponding female connector and crimp it on the other wire, then plug them in, or cut it off and use a butt splice to join the two wires.
That is the male side of a bullet connector. You need to either get the corresponding female connector and crimp it on the other wire, then plug them in, or cut it off and use a butt splice to join the two wires.
A good driver will occasionally miss exits - a bad driver NEVER will!
Are we not doing “phrasing” anymore?
If the images they show in the video are of the final revision of the device (unlikely), it should not be difficult to make a close copy of it right now.
EDIT: Mocked it up as best as I could with made-up numbers for diameter (~3.1") and taper angle (2.0deg) since I am to lazy to go out to my shed and get my electric leaf blower. At 0:55 in the video there is a close-up of the end of one of the mufflers, and it looks like it is made of multiple pieces, with some black material lining the outer shell. I am going to guess that might be something acoustically absorbent, but inexpensive and easy to get, like a sheet of neoprene with an adhesive back. That way, you can stick it inside of the outer shell and then insert the center with the helix. That is the kind of material I would expect in a senior design project when you are iterating through designs and need stuff cheap and quick.
So, I designed it that way for the one I did. https://imgur.com/a/Qr0vOhb
I’ll probably get my leaf blower and update the model so it fits on my leaf blower, and if it works well, I’ll post it to Printables and Thingiverse.
Representing the Tappet Brothers!
I learned my lesson about ‘lifetime’ updates with a Tom Tom GPS unit, from the late '90s, maybe early 2000s. After about 4 or 5 years I couldn’t install the latest map updates, so I contacted CS. They said, “Oh yeah, lifetime means the time of the expected life of the unit, which is 4.5 years. We don’t support that model anymore. Any other questions?”
Yup. I hesitated when I should have bought one in 2022 and now their prices are back up.
I’ve been sitting in the same Steelcase Leap V2 for 8 years at work and it is still comfortable. I love it. When my current chair at home dies (it’s good, but not “Steelcase” good) I’m biting the bullet and getting the Leap V2 at home as well.
You mean Aunt Bunny?
She can’t walk down a flight of stairs…
But I bet she can climb the fuck out of a tree!
I haven’t heard that routine in 20 years at least, but I listened to that cassette tape for months on end.
Yeah, he’s a talker. I’ve got a few more videos of him talking, and some other videos of them seeing how many pieces of kibble they can hold in their beak at a time.
Sorry, I don’t have the slightest idea.
I don’t know exactly how it is implemented, but if I had to guess, it is probably just metadata in the file. I know that when I print out the 2D drawings I make, it puts text in the bottom corner with something to the effect of “This was made with the educational version of Solidworks, Not for commercial use” or something like that. I expect something similar if you tried to open a file made on the educational version on the commercial version, there would be something similar on the screen. Not sure though, since I only have the educational version.
I use CATIA at work, and it’s funny how both programs are made by Dassault, but have such different interfaces.
Yeah, I make things for me and family, but you’d be surprised at how many other people would be interested in it as well. I certainly was. I looked at my Thingiverse analytics, and I’ve had 10’s of thousands of downloads of my things. I know those don’t directly translate into prints, but I was shocked at how many people downloaded my designs that were originally just for me to organize my sandpaper, or sift sand or hold my CNC collets and wrenches. . .
I am on my 7th or 8th year of it. I don’t use it for making money, but use it for making 3D printed things for around the house, then upload them to Thinginverse and Printables for everyone else to use.
It looks like Solidworks for Makers is US $48 / year.
A couple of answers from the Q&A at the bottom of the page:
“3DEXPERIENCE SOLIDWORKS for Makers is meant for personal projects and non-commercial use. Per our terms and conditions, you may sell items you make for a profit up to and not exceeding US$2,000 a year. If you are interested in building your business with SOLIDWORKS tools, check out our start up program or our commercial offers.”
“Currently this offer is available for purchase with a billing address within the following countries: Algeria, Australia, Austria, Belgium, Canada, Czech Republic, Denmark, Finland, France, Germany, Ireland, Italy, Japan, Luxembourg, Morocco, the Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, the United Kingdom, and the United States. More countries will be added soon.”
“Files and data created with your Maker account are digitally watermarked and can only be opened up in another Maker platform. You cannot open up files created with your Maker account within a commercial or academic platform. This digital watermark is added to native 3D file formats, such as .3dxml, .sldprt, .sldasm, and .slddrw. Neutral 3D file formats, such as .stp or .iges can be opened on any platform.”
Mornin’ Angle.
I started on Thingiverse, then copied everything over to Printables when it became available. The traffic difference between them is huge. I uploaded my models to Printables in March 2022, and my total downloads is just over 2K for all of them. On Thingiverse, I have 4K downloads in just the last 30 days.
I still post most things to both sites, but sometimes I get lazy or will “do it later” and just not.
How about a 6 pin connector?
Cable side connector with strain relief. https://www.digikey.com/en/products/detail/amphenol-industrial-operations/PT06SE-10-6P-SR/341057
Bulkhead connector. https://www.digikey.com/en/products/detail/amphenol-industrial-operations/PT02SE-10-6S/341071
To include or exclude the strain relief, add or remove the “(SR)” from the part number.