• Hazdaz@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    I’m not an HVAC guy but you can use PVC pipe in this situation??? That doesn’t seem right.

    • Bigtiddygothgrany@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      It’s a high efficiency system. That’s what they call for. Instead of venting into the chimney they go directly outside, one is for intake of fresh air and the other is for exhaust.

      • Hazdaz@lemmy.world
        link
        fedilink
        arrow-up
        4
        arrow-down
        1
        ·
        1 year ago

        I would have figured the exhaust would be hot enough to melt the plastic. My understanding was that you have to have metal for the first X feet because that’s what would be where it’s hottest.

        But what do I know? If they say you can use plastic from the beginning then have at it. It’s cheaper and easier.

        • Bigtiddygothgrany@lemmy.worldOP
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          High efficiency systems run a lot different. The exhaust doesn’t get even remotely hot enough to melt them. Similar, there are gas fired water heaters that exhaust through PVC as well. Newer houses don’t even have a metal B-vents/chimneys anymore since everything just vents out the side of the house on their own.

          • Hazdaz@lemmy.world
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            1 year ago

            I have a tankless which is supposed to be super efficient but I don’t remember what it’s exhaust piping is. I know the stuff coming out of the house is plastic as well, but I don’t recall what the piping coming out of the unit is.