This connector is very common in the filmmaking industry. It’s also the pest connector ever. Flimsy, bulky, awkward, and hard to assemble. So I redesigned it and 3D printed it.

    • LazaroFilm@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      It’s still very early, I only printed a couple of them as alpha tests and haven’t given any to others to test on set. So far the issue is that I have to re-do all my P-tap cables with this new connector hehe. The things I will focus on is proper fitting without getting stuck or falling out, which also happens on regular connectors due to the bad bad bad core design that even my version can’t really solve, like no locking like P-Tap, and the fact that v+ can connect before GND pin, causing issues with sensitive devices. But again that’s inherent to all D-Tap connectors, and can’t be solved short of switching to Lemo.

  • emrikol@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    How how could that sucker get? It looks like it’s got some beefy connections. Any worries about melting?

    • LazaroFilm@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      1
      ·
      1 year ago

      It’s CF PETg, if you reach the 250°c melting temp, you’re probably having some other more serious issues than the connector melting lol. This is carrying 12v 10a tops at peak draw (that’s the max most batteries used can provide). The original D-tap is ABS, often of questionable quality, I’m considering using ABS, nylon, or ASA as alternatives but I have much more experience with this CF-PETg filament.