blackstrat@lemmy.fwgx.uk to DIY@lemmy.worldEnglish · 6 months agoIs this a hammer drill?lemmy.fwgx.ukimagemessage-square18fedilinkarrow-up112arrow-down12file-text
arrow-up110arrow-down1imageIs this a hammer drill?lemmy.fwgx.ukblackstrat@lemmy.fwgx.uk to DIY@lemmy.worldEnglish · 6 months agomessage-square18fedilinkfile-text
The icon is a little different to what I’ve seen on others and I don’t know how to tell otherwise. Thanks!
minus-squareglimse@lemmy.worldlinkfedilinkEnglisharrow-up5·edit-26 months agoGood masonry bits are carbide-tipped but not all of them. I used those with our sls drill but I stuck to the cheaper ones for anything under 1/2" Perhaps dull was the wrong word but the tips do wear out. You wind up with a useless flat stub at the end that won’t push through anything
Good masonry bits are carbide-tipped but not all of them. I used those with our sls drill but I stuck to the cheaper ones for anything under 1/2"
Perhaps dull was the wrong word but the tips do wear out. You wind up with a useless flat stub at the end that won’t push through anything