I am currently running most of my stuff from an unraid box using spare parts I have. It seems like I am hitting my limit on it and just want to turn it into a NAS. Micro PCs/USFF are what I am planning on moving stuff to (probably a cluster of 2 for now but might expand later.). Just a few quick questions:
-
Running arr services on a proxmox cluster to download to a device on the same network. I don’t think there would be any problems but wanted to see what changes need to be done.
-
Which micro PCs are you running? I am leaving towards HP prodesk or Lenovo 7xx/9xx series around 200 each. I don’t really plan on getting more than 2-3 and don’t run too many things, but would want enough overhead if I switch stuff over to home assistant and windows and Linux VMs if needed.
-
Any best practices you recommend when starting a Proxmox cluster? I’ve learned over time it’s best to set it up correctly than try to fix stuff when it’s running. I wish I could coach myself from 7 years ago now. Would of saved a lot of headaches lol.
It’s 2024, avoid Proxmox and safe yourself a LOT of headaches down the line.
You most likely don’t need Proxmox and its pseudo-open-source bullshit. My suggestion is to simply with with Debian 12 + LXD/LXC, it runs VMs and containers very well. Proxmox ships with an old kernel that is so mangled and twisted that they shouldn’t even be calling it a Linux kernel. Also their management daemons and other internal shenanigans will delay your boot and crash your systems under certain circumstances.
What I would suggest you to use use instead is LXD/Incus.
LXD/Incus provides a management and automation layer that really makes things work smoothly - essentially what Proxmox does but properly done. With Incus you can create clusters, download, manage and create OS images, run backups and restores, bootstrap things with cloud-init, move containers and VMs between servers (even live sometimes).
Another big advantage is the fact that it provides a unified experience to deal with both containers and VMs, no need to learn two different tools / APIs as the same commands and options will be used to manage both. Even profiles defining storage, network resources and other policies can be shared and applied across both containers and VMs.
I draw your attention to containers (not docker), LXC containers because for most people full virtualization isn’t even required. In a small homelab if you can have containers that behave like full operating systems (minus the kernel) including persistence, VMs might not be required. Either way LXD/Incus will allow for both and you can easily mix and match and use what you require for each use case.
For eg. I virtualize the official HomeAssistant image with LXD because we all know how hard is to get that thing running, however my NAS / Samba shares are just a LXD Debian 12 container with Samba4, Nginx and FileBrowser. Sames goes for torrent client that has its own container. Some other service I’ve exposed to the internet also runs a full VM for isolation.
Like Proxmox, LXD/Incus isn’t about replacing existing virtualization techniques such as QEMU, KVM and libvirt, it is about augmenting them so they become easier to manage at scale and overall more efficient. I can guarantee you that most people running Proxmox today it today will eventually move to Incus and never look back. It woks way better, true open-source, no bugs, no BS licenses and way less overhead.
Yes, there’s a WebUI for LXD as well!
Can someone explain the benefits of LXD without the opinionated crap?
create clusters, download, manage and create OS images, run backups and restores, bootstrap things with cloud-init, move containers and VMs between servers (even live sometimes).
provides a unified experience to deal with both containers and VMs, no need to learn two different tools / APIs as the same commands and options will be used to manage both. Even profiles defining storage, network resources and other policies can be shared and applied across both containers and VMs.
What else do you need.
Since you didn’t include a link to the source for your recommendation:
https://github.com/canonical/lxd
I’ve been on Proxmox for 6 or so months with very few issues and have found it to work well in my instance, I do appreciate seeing another alternative and learning about it too! I very specifically like Proxmox as it gives me an actual IP on my router’s subnet for my machines such as Home Assistant. So instead of the 192.168.122.1 it rolls a nice 192.168.1.X/24 IP which fits my range which makes it easier for me to direct my outside traffic to it. Does this also do this? Based on your screenshots, maybe not, IDK.
Thanks for the link! I’ve been running Proxmox for years now without any of the issues like the previous commenter mentioned. Not that they don’t exist, just that I haven’t hit them. I really like Proxmox but love hearing about alternatives. One day I might get bored and want to set things up new with a different stack and anything that’s more free/open is better in my book.
it gives me an actual IP on my router’s subnet for my machines
Yes you configure LXD/Incus’ networking to use a bridge and it will simply delegate the task to your router instead of proving IPs itself. One of my nodes actually runs the two setups at the same time, I’ve a bunch of containers on an internal range and then my Home Assistant VM getting an IP from my router.
How well does it handle backups, and are they deduplicated incremental ones like proxmox backup server makes?
I do regular snapshots of my containers live and sometimes restore them, no issues there. De-duplication and incremental features are (mostly) provided by the storage backend, if you use BTRFS or ZFS for your storage pool every container will be a volume that you can snapshot, rollback, export at any time. LXD also provides tools to make those operations: https://documentation.ubuntu.com/lxd/en/latest/howto/instances_backup/
That makes sense, but no remote backups over the network? Local snapshots I don’t really count as backups.
I’m going to experiment with this! I would love to get rid of Proxmox, it has so many problems and I only run containers anyway.
Is there an easy way to migrate containers? I’m not well versed in LXC despite using it for years.
I’ve no ideia if there’s a reasonable migration path but after running Proxmox for years I wouldn’t even want stuff that was tainted by it ever running on my pristine LXD nodes.
It’d be a pain in the rear to rebuild everything. This proxmox machine is the center of everything, even housing the disk all the config backups are on. I should probably not be doing that…
If you’re on a recent proxmox setup that uses LXC containers you might be able to export those containers using
lxc-snapshot
or some other method and move them to the LXD node… May work just fine, may require other adjustments.Personally the move was worth it. I’m not gonna lie, a ton of my most complex solutions are setup using cloud-init and Ansible so moving from one solution to another was mostly running those again and watch the machines get re-created.
I’ll look at lxc snapshots after the hardware upgrade I got lined up, thanks!
Your comment is wrong in a few ways and suggests using a LXC which is way slower than docker or podman and lacks the easy setup.
Proxmox is good because it makes it easy to create VMs and setup least access. It also has as new of kernel as stable Debian so no, its not terribly out of date.
If you want to suggest that someone install Debian + Docker compose that would make more sense. This isn’t a good setup for more advanced setups and it doesn’t allow for a not of flexibility.
This was a discussion about management solutions such as Proxmox and LXD and NOT about containerization technologies like Docker or LXC. Also Proxmox uses the Proxmox VE Kernel that is derived from Ubuntu.
Your comment makes no sense whatsoever. I’m not even sure you know the difference between LXD and LXC…
Running arr services on a proxmox cluster to download to a device on the same network. I don’t think there would be any problems but wanted to see what changes need to be done.
I’m essentially doing this with my set up. I have a box running proxmox and a separate networked nas device. There aren’t really any changes, per se, other than pointing the *arr installs at the correct mounts. One thing to make note of, i would make sure that your download, processing, and final locations are all within the same mount point, so that you can take advantage of atomic moves.
I second this. It took me a really long time how to properly mount network storage on proxmox VM’s/LXC’s, so just be prepared and determine the configuration ahead of time. Unprivilaged LXC’s have differen’t root user mappings, and you can’t mount an SMB directly into a container (someone correct me if i’m wrong here), so if you go that route you will need to fuss a bit with user maps.
I personally have a VM running with docker for the arr suite and a separate LXC’s for my sambashare and streaming services. It’s easy to coordinate mount points with the compose.yml files, but still tricky getting the network storage mounted for read/write within the docker containers and LXC’s.
I have a setup similar to what you want.
My nas is a low powered atom board that runs unraid.
My dockets run on a ryzen CPU with proxmox. I don’t have a cluster, just 1.
In proxmox I run a VM that runs a all my dockets.
I use portainer to run all my services as stacks. So the arr stack has all the arrs together in a docker compose file. The docker compose files are stored in gitea (one of the few things I still run on unraid) and Everytime I make a change to the git, I press one button on portainer and it pulls down the latest docker compose.
For storage, on proxmox I use zfs with ssds only. The only thing that needs HDDs is the media on my unraid.
When a docker needs to access the media it uses an NFS mount to the unraid server.
Everything else is on my zfs array on proxmox. I have auto zfs snapshots every hour. Borg backup also takes hourly incremental backups of the zfs array and sends it to the unraid server locally and borg base for off-site backup.
The whole setup works very well and it very stable.
The flexibility of using proxmox means that things that work better in a VM (HaOS) I can install as a VM. Everything else is docker.
Use ZFS when prompted - it opens up some features and is a bitch to change later. I don’t understand why it’s not the default.
From what I read disk wear out on consumer drives is a concern when using ZFS for boot drives with proxmox. I don’t know if the issues are exaggerated, but to be safe I ended up picking up some used enterprise SSDs off eBay for that reason.
This seems to be a “widely believed fact” but I haven’t seen any real data to back it up.
Do two NICs. I have a bigger setup, and it’s all running on one LAN, and it is starting to run into problems. Changing to a two network setup from the outset probably would have saved me a lot of grief.
Can you explain what benefit that would bring?
So dual NIC on each device and set up another lan on my router? Sorry it seems like a dumb question but just want to make sure.
I have two Proxmox hosts and two NASes. All are connected at 1Gbps.
The Proxmox hosts maintain the real network mounts - nfs in my case - for the NAS shares. Inside each CT that requires them, these are mapped to mount points with identical paths in each, eg.
/storage/nas1
and/storage/nas2
.All my *arr (and downloader) CTs are configured to use the exact same paths.
It’s seamless. nzbget or deluge download to the same parent folders that my *arr CTs work with, which means atomic renames/moves are pretty much instant. The only real network traffic is from the download CTs to the NASes.
Edit: my downloader CTs download directly to the NAS paths - no intermediate disk at all.
For your Proxmox cluster shoot for three devices. With three devices you can do high availability which is a bonus but not something I though to do when I built my setup.
And you don’t have quorum issues any time a system is down. (I regret making mine a cluster.)
You can set up a qdev on a pi or something.
Can you? That would be really cool
Yeah, you can run it on anything and its great for even numbered clusters.
Can you explain how?
I need to re-ip both of my proxmox hosts and ran into a wall due to quorum. This could get me over that hump.
That being said, it was a failed experiment to put them in a cluster. I don’t use any of the cluster functionality and would love to destroy the cluster config w/o having to rebuild the proxmox hosts.
You don’t have to rebuild the proxmox hosts to remove the cluster. I made the same mistake last year sometime and was able to remove the cluster and each of the proxmox machines works as it should standalone. I don’t recall the exact steps but it was very easy. A quick search for “proxmox remove cluster” gave me this result and from what I recall these are the steps I followed as well. https://rostislavjadavan.com/posts/promox-delete-cluster
I have looked high and low for how to delete a cluster and have never stumbled on this page, thanks! Almost everything I found said I had to destroy proxmox and reinstall it.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters Git Popular version control system, primarily for code HTTP Hypertext Transfer Protocol, the Web IP Internet Protocol LXC Linux Containers NAS Network-Attached Storage SSD Solid State Drive mass storage ZFS Solaris/Linux filesystem focusing on data integrity k8s Kubernetes container management package nginx Popular HTTP server
8 acronyms in this thread; the most compressed thread commented on today has 10 acronyms.
[Thread #411 for this sub, first seen 8th Jan 2024, 20:15] [FAQ] [Full list] [Contact] [Source code]
Consider checking out XCP-ng. I’ve been testing it for a few days and I’m really enjoying it. Seems less complicated and more flexible than Proxmox but admittedly I’m still learning and haven’t even tried multiple servers yet. I would suggest watching some YouTube videos first. Good luck!
I want to like XCP-ng. Unfortunately my primary use case is VMs or containers working with attached USB devices. On Xen it seems like an absolute nightmare to passthrough USB or PCI devices other than GPUs (as vGPUs).
Even on Proxmox it has been frustratingly manual.
I’m planning to try out k8s generic device plugins. I don’t really need VMs if containers will cooperate with the host’s USB. I’m sure that will be a bit of a nightmare on its own and I will be right back to Proxmox.
I hope someone will tell me I am wrong and USB can be easy with Xen. I do prefer XCP-ng over Proxmox in many other ways.
My current setup is 3x Lenovo m920q (soon to be 4) all in a proxmox cluster, along with a qnap nas with 20gb ram and 4x 8tb in raid 5.
The specs on the m920q are: I5 8500T 32gb ram 256gb sata SSD 2tb nvme SSD 1gbe nic
On each proxmox machine, I have a docker server in swarm mode and each of those vm all have the same NFS mounts pointing to the nas
On the Nas I have a normal docker installation which runs my databases
On the swarm I have over 60 docker containers, including the arr services, overseerr and two deluge instances
I have no issues with performance or read/write or timeouts.
As one of the other posters said, point all of your arr services to the same mount point as it makes it far easier for the automated stuff to work.
Put all the arr services into a single stack (or at least on a single network), that way you can just point them to the container name rather than IP, for example, in overseerr to tell it where sonarr is, you’d just say http://sonarr:8989 and it will make life much easier
As for proxmox, the biggest thing I’ll say from my experience, if you’re just starting out, make sure you set it’s IP and hostname to what you want right from the start… It’s a pain in the ass to change them later. So if you’re planning to use vlans or something, set them up first