Hi! I have a USB hub I’ve been using for a few months. I have an M1 MacBook and it was plugged to it through a USB A to A cable and a USB A to C adapter, which worked perfectly.

I’ve been wanting to get rid of the adapter so I got a nice USB A to C cable instead (which can transfer data). The cable works perfectly with all the devices I’ve tried it with (hard drives, phones…) but won’t work with the hub, and I have no idea why. I tried a bunch of other USB A to C cables and they won’t work either. It only works when there’s a USB A to A cable involved.

Here’s a before and after of the setup if it helps: https://imgur.com/a/xUYt1Td

Tried to contact the hub’s support but they won’t reply. Any idea what could be going on?

  • kuneho@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 year ago

    my first guess is that when you use the C to A cable, your PC expects the hub to be the host device - but it’s a slave one. I think with C to A cable, this is always the case, but correct me if I’m wrong, I’m just speculating.

    If you plug the adapter into the C port on your computer, it knows it has to be the host, so the hub will be the slave.

    It’s pretty weird your hub has A as input on its own IMO. To make it work with C, I think you will need to have a device in-between that takes the host role - which in the previous setup was your adapter that made your PC the host. Or another USB-C hub.

    Maybe some tricks with the wiring can help.

    • tahoe@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I’ll admit I had never heard of that host/slave device principle! I don’t think I have the right hardware to test your in-between device theory, but I’ll try to think about something. I sent another message to the support because it’s a pretty annoying issue. Thank you!