The difference in cost for 1000ft spools is <$50 CAD, and you get a product you know always works, is less brittle, can do PoE without becoming a fireball, can be used in commercial installation legally, and is actually in spec. I mean a lot of people who are actually running cables already have separate spools for solid and stranded, plenum and riser, maybe even shielded/burial… no need to add CCA to the mix with all of its downsides (and potentially make that mistake…)
I won’t defend CCA wire but aluminium is an excellent conductor… by weight, not by volume. It’s not that you can’t make good aluminium wire it’s that CCA wire are generally shoddy. Brittleness is an issue but with time copper work-hardens so you can’t mess with it infinitely, either. It’s especially useful for overhead lines as it’s so light.
Somewhat not entirely unrelatedly: Steel bike frames are generally better than aluminium. They’re it practical terms about as erm sturdy at equal weight, but steel bends quite a bit before it breaks so a good steel frame will be lighter than an aluminium frame and can get by without shock absorbers when the geometry is good, that’s why you see curved forks (not if it’s a downhill bike, of course, and “generally” means “if you’re not looking for a carbon-fibre race bike”, there’s reasons to want stiffness in bikes just not for most people).
Next up: Oxygen-free copper and audiophiles. Practically no increase in performance (and definitely none compared to simply using a tiny bit more of regular copper), meanwhile, so cheap that when you’re at a decent store (say, Thomann) and sort by price the cheapest stuff will have OFC.
I don’t like to use aluminum for anything, mainly that it fatigues more easily and will thin/break of strained. My home insurance provider also hates aluminum, I couldn’t get insurance if I have any aluminum wire for my electrical work. Anytime I see it, I just want to pull it out.
CCA feels like the worst of both worlds.
Copper is king for me.
There’s a plethora of problems that can be listed for both aluminum and copper and CCA. Aluminum/CCA is cheaper, but the trade-offs are not worth the savings IMO.
Obligatory warning AVOID CCA CABLES! They can be a hazard!
Go for copper. More on this issue:
https://www.truecable.com/blogs/cable-academy/cca-vs-solid-copper#page_comments=1
Ok, that was an interesting read. Learning is fun y’all
For PoE? Yeah. For data only? No. Short reply: if cable passes test for its category, it passes, otherwise it does not.
The difference in cost for 1000ft spools is <$50 CAD, and you get a product you know always works, is less brittle, can do PoE without becoming a fireball, can be used in commercial installation legally, and is actually in spec. I mean a lot of people who are actually running cables already have separate spools for solid and stranded, plenum and riser, maybe even shielded/burial… no need to add CCA to the mix with all of its downsides (and potentially make that mistake…)
I won’t defend CCA wire but aluminium is an excellent conductor… by weight, not by volume. It’s not that you can’t make good aluminium wire it’s that CCA wire are generally shoddy. Brittleness is an issue but with time copper work-hardens so you can’t mess with it infinitely, either. It’s especially useful for overhead lines as it’s so light.
Somewhat not entirely unrelatedly: Steel bike frames are generally better than aluminium. They’re it practical terms about as erm sturdy at equal weight, but steel bends quite a bit before it breaks so a good steel frame will be lighter than an aluminium frame and can get by without shock absorbers when the geometry is good, that’s why you see curved forks (not if it’s a downhill bike, of course, and “generally” means “if you’re not looking for a carbon-fibre race bike”, there’s reasons to want stiffness in bikes just not for most people).
Next up: Oxygen-free copper and audiophiles. Practically no increase in performance (and definitely none compared to simply using a tiny bit more of regular copper), meanwhile, so cheap that when you’re at a decent store (say, Thomann) and sort by price the cheapest stuff will have OFC.
I don’t like to use aluminum for anything, mainly that it fatigues more easily and will thin/break of strained. My home insurance provider also hates aluminum, I couldn’t get insurance if I have any aluminum wire for my electrical work. Anytime I see it, I just want to pull it out.
CCA feels like the worst of both worlds.
Copper is king for me.
There’s a plethora of problems that can be listed for both aluminum and copper and CCA. Aluminum/CCA is cheaper, but the trade-offs are not worth the savings IMO.