I’d like to get an outdoor Temperature Sensor that can be used with HA and Google Home. Anyone have any recommendations?

  • digdilem@feddit.uk
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    There’s lots of ways. I’ve used an Aqara zigbee temp/humidity sensor before which worked fine, just needed protection from rain.

    Now I’m using a onewire dallas sensors, along with quiet a few others around the house. They work fine too.

    • Fenixin@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Same here, I’ve been using an aqara ZigBee sensor for more than two years and it works great.

      I designed 3d printed rain proof enclosure and it’s been reporting outdoor temperature and humidity for more than two years with no problem.

      The worst part for me is the changing the battery. The sensor is on a hard to reach place and my design is not the best, so I fear when the battery gets low.

      I was planning to build something like this for the rain: https://community.home-assistant.io/t/diy-zigbee-rain-gauge/255379https://community.home-assistant.io/t/diy-zi

    • Fenixin@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Same here, I’ve been using an aqara ZigBee sensor for more than two years and it works great.

      I designed 3d printed rain proof enclosure and it’s been reporting outdoor temperature and humidity for more than two years with no problem.

      The worst part for me is the changing the battery. The sensor is on a hard to reach place and my design is not the best, so I fear when the battery gets low.

      I was planning to build something like this for the rain.

    • Terrasque@infosec.pub
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Same here, esp’s and Dallas sensors. Some also have extra sensors like PIR, humidity & light, and some control some led strips too

    • Fenixin@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Same here, I’ve been using an aqara ZigBee sensor for more than two years, it works great.

      I designed 3d printed rain proof enclosure and it’s been reporting outdoor temperature and humidity for more than two years with no problem.

      The worst part for me is the changing the battery. The sensor is on a hard to reach place and my design is not the best, so I fear when the battery gets low.

      I was planning to build something like this for the rain: https://community.home-assistant.io/t/diy-zigbee-rain-gauge/255379https://community.home-assistant.io/t/diy-zi