After spending so much time and energy with an entry-level home coffee roaster, here are my takeways

Can it make great coffee?

Absolutely! My preference gravitates towards light roasts or lighter medium roasts. Although the Gene is not very good at light roasts, lighter medium roasts are easily achievable. The coffee you can roast at home may never be as good as what the best artisan roasters can produce, but it will always be 1000x better than commodity supermarket charcoal you can buy everywhere (and cheaper too).

Is it a good machine?

Yes and no.

  • It’s easy to use because, apart from time, there is really just a single variable you can influence: maximum temperature. With a decent workflow you can produce excellent coffee, but it lacks everything people obsess about (temperature probes and Artisan integration, airflow control, power control, automation etc.) that makes a high-end home roaster much closer to a professional tool.
  • Ambient temperature (and I suspect humidity) influence it a lot, making batches hard to replicate. Target temperature and 1C can be as much as 1-1.5 minutes sooner in summer.
  • Airflow is everything, and chaff can easily block the chamber’s intake, stalling the internal temperature at 220-230°C and “ruining” (control over) a batch.
  • Batch size is kinda small at 250g, so if you wanna roast larger quantities, you must do several small batches in a row. I usually roast 4x250g batches in a single session, and it lasts me about a month.

Are complicated workflows necessary?

No. My personal workflow is much simpler and basically the same for every bean after preheating the machine at 220°C for about 10mins:

  • Dry at 180°C for 3 minutes
  • Increase temperature to 135-145°C depending on the bean, it should get there around the 7min mark. Hold until 1C.
  • Once 1C starts rolling (depending on the bean, around 8-11min mark), reduce temp to 220°C and dump after 1 minute (I built an external cooler that adapts to my vacuum cleaner, do not use the built-in cooling function, it sucks)

Is it worth it?

If your local roasters suck, all you can access is supermarket coffee or your local or online roasters are prohibitively expensive (don’t forget to still support great local businesses once in a while), if you’ve got time and love to experiment, if you love DIY, go for it!

  • GreatAlbatross@feddit.uk
    link
    fedilink
    English
    arrow-up
    1
    ·
    3 months ago

    This is a nice run-down, thanks for sharing.

    I’ve considered buying a roaster, but always wondered if it would actually be worth it. By the time I’d sourced good green beans, and put the time/energy into roasting, you’re correct, and I think I probably would be better using my local (lovely) roastery!

    • WFH@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 months ago

      Thanks!

      TBH I didn’t start roasting because of time or money considerations. It’s just another hobby that aligns with the coffee-obsessive lifestyle. The fact that it might eventually become more cost effective than buying roasted beans was definitely not the highest in my list of priorities :D