• june@lemmy.world
    link
    fedilink
    English
    arrow-up
    53
    arrow-down
    3
    ·
    1 year ago

    I gotta say, this is a very different from what I’m used to comment section. I really expected to come in and see a huge amount of anti-Mac sentiment but instead just see a bunch of troubleshooting. Granted OP didn’t ask for help and was clearly hoping to just shit on MacBooks (I’ve never had this problem with any of mine btw, this looks like a bug or fringe case) but folks just wanna be helpful and OP is all mAcS aMiRiTe?

  • FlatFootFox@lemmy.world
    link
    fedilink
    English
    arrow-up
    46
    ·
    1 year ago

    Try plugging the Mac in without a dock.

    A lot of docks out there are DisplayLink based, and you may need to install their driver to get the higher refresh rate.

    Also try switching up which type cable you’re plugging into the dock. Most dock manuals have an esoteric support table based on whether or not you plugged in a DisplayPort or HDMI cable.

    • stappern@lemmy.oneOP
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      31
      ·
      1 year ago

      Try plugging the Mac in without a dock.

      i already tried the mac adapter same thing.

      Try plugging the Mac in without a dock.

      considering it only has typec poirts thats kinda impossible, you need 1 adapter at least in the chain (thanks apple!)

          • ThatOneDudeFromOhio@lemmy.world
            link
            fedilink
            English
            arrow-up
            29
            arrow-down
            1
            ·
            1 year ago

            USB-C is just the physical port. The signal is HDMI due to whatever you’re likely docking through. You need to make sure everything in the path from your computer to the monitor can handle an HDMI 2.0 signal to achieve 60hz.

            Read the whole thread before throwing up your hands. Upvotes don’t count for anything here, and tons of people have led you to water. Time to drink it or quit complaining.

            This is a fixable problem unless you just wanted to post the screenshot for meaningless upvote rage bait because mac bad.

            • stappern@lemmy.oneOP
              link
              fedilink
              English
              arrow-up
              3
              arrow-down
              39
              ·
              edit-2
              1 year ago

              HDMI 2.0 signal to achieve 60hz.

              i didnt know we needed hdmi 2.0 to get 60hz…

              oh right, we dont. you might want to look at the screenshot.

              and this is mildlyinfuriating and i posted something mildlyinfuriating, not sure why you are getting upset. if you dont like this community you can unsubscribe

              • pbr@sopuli.xyz
                link
                fedilink
                English
                arrow-up
                16
                ·
                1 year ago

                There’s one piece of the puzzle missing no one is mentioning.

                You won’t be able to to reach 1080p@60hz unless the monitor+cable+hub supports 4K@60hz . Only then, if then, you can click “Show all resolutions” holding alt and you’ll be able to see something like “1080p with scaling”. Because retina.

                That’s why you were able to select 1080p 60hz and everything looked blurry. That’s just how macOS is at a lower resolution (downscaled)

                And then, you’ll be able to change the text scaling etc. I think the most comfortable you’ll be with is 1440p and text scaling on the second level, otherwise things look too zoomed in (that’s what I use, with a cheap cable and a 25$ dollar hub from aliexpress that DOES support 4k@60hz - so: MacBook -> cheap hub+4k@60hz support -> hdmi cable that came with the monitor.

                Sorry, I don’t have my laptop around to test. But there’s somewhere you can press while holding alt that will show all available resolution options (+ the show all resolutions toggle). Holding alt + click is generally macOS’ “show me advanced options” toggle

      • FlatFootFox@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        Some dongles are limited to 4K@30. Like this one. You’ll want to double-check the specs of your adapter. They do make DP/HDMI to USB-C cables for what it’s worth. USB-C is a frustrating spec because you can run a lot of different standards over it. Even with cables you’ll want to make sure they’re not running some older spec.

        I just double-checked your monitor’s manual. It looks like HDMI 1 can only do 30hz. Only HDMI 2 and the DP ports support 60hz. Were you trying to connect through HDMI 1?

        • stappern@lemmy.oneOP
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          7
          ·
          1 year ago

          yes i know the 4k30 limits , i cant even do 1080p 60 though(as per screenshoit). i tried both hdmi 1 and 2

          • eramseth@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            This is probably upscale 1080p where each logical pixel is actually 4 physical pixels. So the monitor gets a 4k signal that contains 1080p logical pixels.

            It’s basically how retina displays work.

            I think you can disable that by turning off display scaling or something.

  • jacktherippah@lemmy.world
    link
    fedilink
    English
    arrow-up
    30
    ·
    edit-2
    1 year ago

    Check your dock/adapter and HDMI cable. You keep insisting your docks all work with other laptops, yeah? Then check the cable. Also, have you turned it off and on again?

  • hikarulsi@lemmy.world
    link
    fedilink
    English
    arrow-up
    26
    ·
    1 year ago

    Mine was like that with HDMI cable until I have my hands on the usb-c to mini-display cable

    • stappern@lemmy.oneOP
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      12
      ·
      1 year ago

      i only have type c ports here so everything goes trough a dock(and i tried 5 different ones so its not that)

      • hikarulsi@lemmy.world
        link
        fedilink
        English
        arrow-up
        13
        ·
        edit-2
        1 year ago

        if you have a usb-c to display port, give that a try without a dock usb-c hub -> usb-c display port only work on high end hubs (i have an alogic right in front of me now that works)

          • ThatOneDudeFromOhio@lemmy.world
            link
            fedilink
            English
            arrow-up
            24
            arrow-down
            1
            ·
            1 year ago

            If you’re trying to troubleshoot this, he’s saying to try it with just the cable so that you can identify that it’s the doc causing the issue and not your computer/os/monitor/cables. Remove variables and continue.

            • stappern@lemmy.oneOP
              link
              fedilink
              English
              arrow-up
              3
              arrow-down
              31
              ·
              1 year ago

              i tried 5 different docks, its not the dock…

              all those variables work fine with any other laptopt, the macbook is the variable here.

              • eek2121@lemmy.world
                link
                fedilink
                English
                arrow-up
                12
                ·
                1 year ago

                They are telling you not to use ANY dock. Connect the cable to the monitor.

                My Macbook drives a 144hz 4K display, so your issue is not your Mac unless you have an Intel based Mac.

                Likely it is either the cable or user error.

                • stappern@lemmy.oneOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  arrow-down
                  10
                  ·
                  1 year ago

                  This MacBook has 4 tpye c ports and that’s it. So you need some kind of adapter,no way around it. I tried and the results are the same.

                • stappern@lemmy.oneOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  arrow-down
                  2
                  ·
                  1 year ago

                  For the brief time while I had Linux on the laptop it worked fine 4k 60p.

                  No I didn’t since they work fine with other laptops

  • adj16@lemmy.world
    link
    fedilink
    English
    arrow-up
    25
    arrow-down
    5
    ·
    1 year ago

    Because of your title, I decided to see if I could guide ChatGPT into calculating the theoretical refresh rate at which the monitor would start to cook its user. It really fought me and wouldn’t even attempt the calculation, but it did give me this suggestion for my post that’s so bad it’s almost good…

    For example, you could playfully suggest a refresh rate of “1,000,000 frames per second, capable of grilling a hotdog if you accidentally stand too close!” Remember to keep the humorous tone and make it clear that it’s a fictional scenario for entertainment purposes.

    • bionicjoey@lemmy.ca
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      1
      ·
      1 year ago

      ChatGPT can’t do math. It would make up a coherent formula that looks right but it’s literally not designed to know how to calculate things. Ask Wolfram Alpha instead.

    • Reliant1087@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      Why would refresh rate cook anything? If the pixel was on continuously, it doesn’t cook anything, then why would modulation matter? It’s not like you’re increasing intensity.

      • CanadaPlus@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        3
        ·
        edit-2
        1 year ago

        Theoretically. I mean, by the current laws of physics an analog display is at the infinite limit of refresh rate. In practice, though, existing consumer digital circuits take energy to refresh.

      • adj16@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        2
        ·
        1 year ago

        My line of thinking was that a higher refresh rate uses more power, so the monitor gives off more heat. If you could continue to increase that unbounded, without stopping for silly things like safety regulations or power draw, that you could eventually get to a refresh rate which would cause the monitor to boil the user alive - a la what-if.xkcd.com

    • ErwinLottemann@feddit.de
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      1 year ago

      ChatGPT can’t calculate. It can just ‘complete’ (maybe you could call it ‘generate’) text.

      • adj16@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        1
        ·
        1 year ago

        I’m not sure that’s a fair categorization. It can code complete and perform mathematical calculations, even if the way it is achieving them is unconventional. For example, I asked it to answer a novel calculus question and it handled that:

        ChatGPT doing calculus

        It doesn’t seem like such a leap then to calculate the “cooking refresh rate”, provided it has all the variables. The problem is, I don’t know all the variables necessary, so I can neither provide them nor tell it where/how to derive them.

  • jflorez@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    17
    arrow-down
    1
    ·
    1 year ago

    It might be the HDMI cake that limits the refresh rate, or if the Mac you are using doesn’t have a hdmi port it might be the adapter that is causing the limit. The specs for the monitor say it should go up to 60hz at 4K

    • stappern@lemmy.oneOP
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      12
      ·
      edit-2
      1 year ago

      same exact setup pushes 4k 60hz to any Dell in the office. at this point i tried 5 different docks

    • stappern@lemmy.oneOP
      link
      fedilink
      English
      arrow-up
      21
      ·
      edit-2
      1 year ago

      what 4k monitor doesnt support 30hz at 1080p?

      and no it does 60hz with any linux laptop

      • Sjatar@sjatar.net
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        From the specs it should do 4k@60. At 1080p it would be madness if it could not drive at 60.

          • max@feddit.nl
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            Mine works fine at 2x 1440p144hz. Even my old loaner MacBook did fine at 1x 1440p144hz and 1x 1440p60hz, though that was a relatively old laptop (mid 2017).

  • lunaticneko@lemmy.ml
    link
    fedilink
    English
    arrow-up
    12
    arrow-down
    1
    ·
    1 year ago

    The doctor has diagnosed your problem. You should lower the screen frequency as you complained that it Hertz a lot.

  • DecentM@lemmy.ml
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 year ago

    My coworker had this issue recently, and he had to screw around with different cables, docks, and profile settings on the monitor itself for half an hour before the better refresh rates showed up

  • paulcdb@kbin.social
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    Is it a M1 chip?

    We’re having the same issue with picking refresh rates which I think is linked to something quirky Apple is/isn’t doing on the M1 chips.

    My 2018 MacBook Pro works fine, can select refresh rates… M1 Mac Pro doesn’t see anything, M1 MacBook Pro only lets you see 30/60hz but is flaky displaying anything ‘if’ it decides to see it. So the only option would be to have a scaler up/down convert it (Like blackmagic UpDownCross converter) but I haven’t tested if that solves the issue yet since I don’t own one and as they are now, unlikely to every buy one!